LaCie 12big Rack Fibre 8 Bedienungsanleitung Seite 72

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 87
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 71
LaCie 12big Rack Fibre 8 Module Removal & Replacement
User Manual page 72
5.4.4. Removal and Installation of the Blank
I/O Module
5.4.4.1. Removal
1. Grasp the module latch between your thumb and forefinger,
and squeeze together to release the latch. (Fig. 80)
2. Pull the latch outward to eject the module from the enclosure.
3. Using the latch as a handle and withdraw from the module (Fig.
81).
5.4.4.2. Installation
1. With the latch in the open position, slide the module into the
enclosure until the latch engages. (Fig. 82)
2. Secure the module by closing the latch. A click should be heard
as the latch locks into position (Fig. 80).
5.4.5. Replacing a Battery Module
IMPORTANT INFO: There is a danger of explosion if the battery
is disposed of improperly. Dispose of used batteries in accordance
with the manufacturer’s instructions and national regulations.
CAUTION: The batteries in the 12big Rack Fibre 8 RAID Controller
may present a risk of fire, explosion or burns. Do not disassemble,
crush, or heat above 60° C (140° F) or incinerate.
IMPORTANT INFO: Replace the battery module with a 12big
Rack Fibre 8 Battery only. Use of another battery may present a risk
of fire or explosion.
Fig. 80 - Releasing/Securing the Module Handle Latch
Fig. 81 - Unlatching and Removing the Blank I/O Module
Fig. 82 - Installing and Latching the Blank I/O Module
Seitenansicht 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 86 87

Kommentare zu diesen Handbüchern

Keine Kommentare