LaCie 4big Quadra Bedienungsanleitung PDF herunterladen (Seite 14)

LaCie 4big Quadra • Design by Neil Poul ton Setup

User Manual page 14

2.2. Turn the 4big On

The power supply kit is composed of two cables: one cable (A)

connects to the LaCie drive; and the other cable (B) connects to

a power outlet, such as a wall outlet or a surge protector.

Connect cable

1. A to the 4big.

Connect cable

2. B to the power supply brick (C).

Connect cable

3. B to a surge protector or wall outlet.

Turn on the drive by moving the power switch on the back

of the drive to the “on” position.

The 4big system may take up to 30 seconds to boot up.

CAUTION: Only use the AC adapter supplied with your spe-

ciﬁc LaCie device. Do not use a power supply from another

LaCie device or another manufacturer. Using any other power

cable or power supply may cause damage to the device and

void your warranty.

Always remove the AC adapter before transporting your LaCie

drive. Failure to remove the adapter may result in damage to

your drive and will void your warranty.

TeChNICAl NOTe: You may use your LaCie drive when in a

foreign country thanks to its 100-240 Volt power supply. To be

able to use this feature, you may need to purchase an appro-

priate adapter or cord. LaCie accepts no responsibility for any

damage to the drive resulting from the use of an inappropriate

adapter. Using an adapter other than one authorized by LaCie

will void your warranty.

off

o

o

NOTe: Depending on your country, power outlet connections

may be different from the one shown above.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Keine Kommentare

LaCie 4big Quadra Bedienungsanleitung Seite 14