LaCie USB Key MAX Bedienungsanleitung PDF herunterladen (Seite 17)

LaCie USB Key MAX

User Manual

page 16

Interface and Data Transfer Information

A data transfer is the ﬂow of data that accomplishes

a task, usually related to moving data from storage to

computer RAM or between storage devices. During

data transfers, it’s best to wait before launching other

applications on the same USB 2.0 port. Anomalies may

arise with computers that have USB 2.0 controllers that

do not conform to OHCI (Open Host Controller In-

terface) standards. In any other conﬁgurations, we can-

not ensure 100% correct operation.

If you experience hanging problems, proceed as fol-

lows:

Make sure that the USB cable is connected tightly

and securely, from the drive to the computer.

Disconnect the USB cable. Wait 30 seconds. Recon-

nect.

CAUTION: Do not connect USB cables so that

they form a ring of devices. ere is no need for

terminators on USB or devices, so the unused USB

connectors should be left empty.

TeChNICAl NOTe: Controller - A control-

ler is a component or an electronic card (referred

to in this case as a “controller card”) that enables a

computer to communicate with or manage certain

peripherals. An external controller is an expansion

card which ﬁlls one of the free slots (i.e. PCI or

PCMCIA) inside your PC and which enables a pe-

ripheral (ex. CD-R/RW drive, scanner or printer)

to be connected to the computer. If your computer

is not equipped with a USB controller card, you

can purchase an external controller through LaCie.

Contact your LaCie reseller or LaCie Technical

Support (section 6, Contacting Customer Support)

for more information.

4.3. Data Transfers

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

LaCie USB Key MAX Bedienungsanleitung Seite 17