LaCie 301442U Bedienungsanleitung PDF herunterladen (Seite 17)

LaCie d2 Quadra • Design by neil Poulton Getting Connected

User Manual page 16

FireWire 400 and FireWire 800 interfaces allow you to connect

another hard drive, a DVD±RW writer or a digital video cam-

era directly to the LaCie d2 Quadra (this connection is called

“daisy-chaining”).

To daisy-chain devices, you must be using the same interface

(FireWire). Your computer will not recognize the daisy-chained

device if the interfaces are mixed, i.e. a FireWire device at-

tached to a drive that is connected to the computer via the

Hi-Speed USB 2.0 interface.

TECHNICAL NOTE: When you daisy-chain using a mix of

interfaces (FireWire 400 and FireWire 800) the resultant speed

will be limited to the lowest common denominator (FireWire

400 speeds).

Connect your LaCie d2 Quadra’s power supply and host

computer interface by following the steps in sections 2.1 to

2.3.

To attach a digital video camera*:

Using the iLink/DV cable (sold separately), connect the

4-pin end of the cable to the 4-pin port on your digital

camera.

Connect the 6-pin end of the iLink/DV cable to the 6-pin

FireWire port on the back of the LaCie Hard drive (C).

To attach a FireWire peripheral:

Connect the FireWire 400 or 800 cable into an available

FireWire 400 or 800 port on your FireWire peripheral.

Attach the other end of the FireWire 400 or 800 cable to

an available FireWire 400 or 800 port on the LaCie d2

Quadra (C).

The digital camera should now appear under My Computer

(Windows users) or on the desktop (Mac users).

*Some cameras do not support this conﬁguration or may downgrade

2.4. Connecting Multiple Devices

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Keine Kommentare

LaCie 301442U Bedienungsanleitung Seite 17